Shopping Options

ChemSet 740K 50mL Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)

SKU: CCH740K

$87.67

Backordered - 0-5 day lead time

Chem-Set 740K Sink & Dishwasher Anchor Kit (4 Sets of Hardware + 633 Epoxy Adhesive) contains everything needed for secure dishwasher or sink mounting under natural stone counters without drilling. The kit includes: undermount studs, sink clips, Chem-Set 633 Epoxy (suitable natural stone countertops,) dispensing gun, and mixing nozzles.

Benefits:

  • The anchor kit is ideal for counters made from natural stone (granite, marble, concrete, wood.)
  • No additional glues are needed. The stud base glues to the underside of the counter using epoxy.
  • The 1-1/2″ diameter stud base is designed to fit into tight areas.
  • Easily install sinks using the included wing nuts, lock washers and sink clips.
  • The kit contains a dispensing gun and mixing nozzles good for several applications.
  • Each Undermount Stud set includes four sets of hardware plus dishwasher mounting brackets/fasteners.

Each Kit will Contain:

Instructions:

  1. Remove the cap from 633 Epoxy Adhesive. Dispense a small amount of adhesive until the adhesive is flowing from both chambers of the container.
    • 50ml Cartridge: Place the cartridge into the dispensing gun without attaching the mixing nozzle. Dispense a small amount until both sides dispense at the same time. Attach a mixing nozzle and dispense a 6-8” bead of adhesive on scrap material to purge the cartridge.
  2. Clean the area to be bonded and the glue-on fastener with alcohol. The surface must be clean and dry for good adhesion.
  3. Carefully apply 633 Epoxy to the base of the glue-on fastener and set in desired position on the underside of the countertop around the sink cut-out.
  4. Allow 45 – 60 minutes for adhesive to reach proper handling strength.
    • Note: Adhesive will continue to cure for up to 24 hours.
  5. Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink mounting bracket onto the glue-on fastener, add the washer, then tighten with the wingnut.

Product Attachments

Sink Anchor Kit Instructions (521.41 kB)

Quantity:

  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

  • Solid Surface/Quartz Sink Anchor Kit (4 Sets of Hardware + 605 Acrylic)

    SKU CCH742K
    Our Price Starting at $23.05     View Product

    Solid Surface/Quartz Sink Anchor Kit (4 Sets of Hardware + 605 Acrylic)

    Chem-Set 743K Solid Surface/Quartz Sink Anchor Kit (4 Sets of Hardware + 605 Acrylic) is an excellent choice for securing undermount kitchen sinks and dishwashers to solid surface, engineered stone or quartz counters without drilling. The sink mounting kit includes: undermount studs, sink clips, Chem-Set 605 Acrylic Adhesive, Mixing Cups and Mixing Sticks.

    Benefits:

    • The anchor kit contents are ideal for undermount kitchen sinks and solid surface, engineered stone, and quartz counters.
    • No additional glues are needed. The stud base glues to the underside of the counter using epoxy.
    • The 1-1/2″ diameter stud base is designed to fit into tight areas.
    • Easily install sinks using the included wing nuts, lock washers and sink clips.
    • Each sink mounting kit contains a 25ml Hand Syringe of 633 Epoxy, Mixing Sticks, and Mixing Cups.
    • Each Undermount Stud set includes four sets of hardware plus a dishwasher mounting kit.

    Each Kit will Contain:

    • (4) M1-RB38-1/4-20×0.75″ Studs
    • (4) Z-Shaped Sink Clips
    • (4) Wingnuts
    • (4) Washers
    • (2) F1CT Dishwasher Fasteners
    • (1) 605 Acrylic, 25ml Hand Syringe
    • (2) Mixing Stick
    • (2) Mixing Cups

    Instructions:

    1. Remove the cap from 605 Acrylic Adhesive. Dispense a small amount of adhesive until the adhesive is flowing from both sides chambers of the syringe.
      • 25ml Hand Syringe: Push the adhesive out in equal amounts in the provided mixing cup and mix thoroughly with mixing stick until the color is completely uniform.
    2. Clean the area to be bonded and the glue-on fastener with alcohol. The surface must be clean and dry for good adhesion.
    3. Carefully apply 633 Epoxy to the base of the glue-on fastener and set in the desired position on the underside of the countertop around the sink cut-out.
    4. Allow 45-60 minutes for adhesive to reach the proper handling strength.
      • Note: Adhesive will continue to cure for up to 24 hours.
    5. Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink brackets onto the glue-on fastener, add washer, then tighten with the wingnut.

    Product Attachments

    Sink Anchor Kit Instructions (521.41 kB)

    SKU: CCH742K Category:
    Our Price Starting at $23.05

  • ChemSet 735-8 Sink Anchor Kit (8 Sets of Hardware)

    SKU CCH735-8
    Our Price Starting at $12.99     View Product

    ChemSet 735-8 Sink Anchor Kit (8 Sets of Hardware)

    Chem-Set 735-8 Sink Anchor Kit (8 Sets of Sink Mounting Hardware) contains undermount studs and sink clips, (also called anchor clips,) to mount sinks securely under any counter surface without drilling. With the use of our Chem-Set 633 Epoxy (for Natural Stones) or Chem-Set 605 Acrylic (for Solid Surface/Quartz) sink brackets securely adhere to the underside of your countertop to support your undermount sink.

    Benefits:

    • Easy to use with natural & engineered stone or any solid surface top
    • No special glues are needed. The stud base glues to underside of the counter, using epoxy or another adhesive you currently use.
    • The 1-1/2″ diameter stud base is designed to fit into tight areas.
    • Easily install sinks using the included wing nuts, lock washers, and epoxy sink clips.
    • Each undermount stud set contains eight sets of hardware.

    Each Kit will Contain:

    Instructions:

    1. Remove the cap from the 633 Epoxy or 605 Acrylic Adhesive. Dispense a small amount of adhesive until the adhesive is flowing from both chambers of the container.
      • 25ml Hand Syringe: Push the adhesive out in equal amounts in the provided mixing cup and mix thoroughly with mixing stick until the color is completely uniform.
      • 50ml Cartridge: Place cartridge into a dispensing gun without attaching the mixing nozzle. Dispense a small amount until both sides dispense at the same time. Attach the mixing nozzle and dispense a 6-8” bead of adhesive on scrap material to purge the cartridge.
    2. Clean the area to be bonded and the glue-on fastener with alcohol. The surface must be clean and dry for good adhesion.
    3. Carefully apply 633 Epoxy or 605 Acrylic to the base of the glue-on fastener and set in the desired position on the underside of the countertop around the sink cut-out.
    4. Allow 45-60 minutes for adhesive to reach the proper handling strength.
      • Note: Adhesive will continue to cure for up to 24 hours.
    5. Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink bracket onto the glue-on fastener, add the washer, then tighten with the wingnut.

    Product Attachments

    Sink_Anchor_Kit_Instructions (521.41 kB)

    SKU: CCH735-8 Category:
    Our Price Starting at $12.99

  • Granite/Marble Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)

    SKU CCH-K4E
    Our Price Starting at $20.00     View Product

    Granite/Marble Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)

    Chem-Set 742K Sink & Dishwasher Anchor Kit (4 Sets of Hardware + 25ml Hand Syringe 633 Epoxy Adhesive) includes all necessary sink mounting hardware for undermount sinks and dishwashers on granite and marble countertops without the need to drill holes. Each kit contains undermount studs, sink mounting brackets, Chem-Set 633 Epoxy, mixing cups, and mixing sticks.

    Benefits:

    • The kit is designed specifically for use with granite and marble countertops.
    • No additional glues are needed. The stud base glues to the underside of the counter using the included epoxy.
    • The 1-1/2″ diameter stud base is designed to fit into tight areas.
    • Easily install sinks using the included wing nuts, lock washers and sink clips.
    • Included in the kit is a 25ml Hand Syringe with 633 Epoxy, mixing sticks and mixing cups for multiple applications.
    • Each Undermount Stud set includes four sets of sink mounting brackets/mounting hardware plus two extra sets of hardware for dishwasher installation.

    Each Kit will Contain:

    • (4) M1-RB38-1/4-20×0.75″ Studs
    • (4) Z-Shaped Sink Clips
    • (4) Wingnuts
    • (4) Washers
    • (2) F1CT Dishwasher Fasteners
    • (1) 633 Epoxy, 25ml Hand Syringe
    • (2) Mixing Stick
    • (2) Mixing Cups

    Instructions:

    1. Remove the cap from the 633 Epoxy Adhesive. Dispense a small amount of adhesive until adhesive is flowing from both sides of the syringe.
      • 25ml Hand Syringe: Push adhesive out in equal amounts in provided mixing cup and mix thoroughly with mixing stick until the color is completely uniform.
    2. Clean the area to be bonded and the glue-on fastener with alcohol. Surface must be clean and dry for good adhesion.
    3. Carefully apply 633 Epoxy to the base of the glue-on fastener and set in the desired position on the underside of the countertop around the sink cut-out.
    4. Allow 45-60 minutes for adhesive to reach the proper handling strength.
      • Note: Adhesive will continue to cure for up to 24 hours.
    5. Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink bracket onto the glue-on fastener, add washer, then tighten with the wingnut.

    Product Attachments

    Sink Anchor Kit Instructions (521.41 kB)

    SKU: CCH-K4E Category:
    Our Price Starting at $20.00