Shop
Items 61–72 of 308
-
Chem-Set™ MS-35 White – 10.3 oz Cartridge
SKU CCS-MS35-WT-10OZ Our Price Starting at $13.99 View ProductChem-Set™ MS-35 White – 10.3 oz Cartridge
MEETS SPECIFICATIONS: ASTM C920 Type S, Grade NS, Class 25, Use NT, A, M, G; TT-S-00230C, USDA Approved, AAMA 808.3, 805.2, 803.3 (Type I), 802.3 (Type II).
Our Price Starting at $13.99 -
ChemSet 735-8 Sink Anchor Kit (8 Sets of Hardware)
SKU CCH735-8 Our Price Starting at $12.99 View ProductChemSet 735-8 Sink Anchor Kit (8 Sets of Hardware)
Chem-Set 735-8 Sink Anchor Kit (8 Sets of Sink Mounting Hardware) contains undermount studs and sink clips, (also called anchor clips,) to mount sinks securely under any counter surface without drilling. With the use of our Chem-Set 633 Epoxy (for Natural Stones) or Chem-Set 605 Acrylic (for Solid Surface/Quartz) sink brackets securely adhere to the underside of your countertop to support your undermount sink.
Benefits:
- Easy to use with natural & engineered stone or any solid surface top
- No special glues are needed. The stud base glues to underside of the counter, using epoxy or another adhesive you currently use.
- The 1-1/2″ diameter stud base is designed to fit into tight areas.
- Easily install sinks using the included wing nuts, lock washers, and epoxy sink clips.
- Each undermount stud set contains eight sets of hardware.
Each Kit will Contain:
- (8) M1-RB38-1/4-20×0.75″ Studs
- (8) Z-Shaped Sink Clips
- (8) Wingnuts
- (8) Washers
Instructions:
- Remove the cap from the 633 Epoxy or 605 Acrylic Adhesive. Dispense a small amount of adhesive until the adhesive is flowing from both chambers of the container.
- 25ml Hand Syringe: Push the adhesive out in equal amounts in the provided mixing cup and mix thoroughly with mixing stick until the color is completely uniform.
- 50ml Cartridge: Place cartridge into a dispensing gun without attaching the mixing nozzle. Dispense a small amount until both sides dispense at the same time. Attach the mixing nozzle and dispense a 6-8” bead of adhesive on scrap material to purge the cartridge.
- Clean the area to be bonded and the glue-on fastener with alcohol. The surface must be clean and dry for good adhesion.
- Carefully apply 633 Epoxy or 605 Acrylic to the base of the glue-on fastener and set in the desired position on the underside of the countertop around the sink cut-out.
- Allow 45-60 minutes for adhesive to reach the proper handling strength.
- Note: Adhesive will continue to cure for up to 24 hours.
- Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink bracket onto the glue-on fastener, add the washer, then tighten with the wingnut.
Product Attachments
Sink_Anchor_Kit_Instructions (521.41 kB)
Our Price Starting at $12.99 -
ChemSet 740K 50mL Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)
SKU CCH740K Our Price Starting at $87.67 View ProductChemSet 740K 50mL Sink Anchor Kit (4 Sets of Hardware + 633 Epoxy)
Chem-Set 740K Sink & Dishwasher Anchor Kit (4 Sets of Hardware + 633 Epoxy Adhesive) contains everything needed for secure dishwasher or sink mounting under natural stone counters without drilling. The kit includes: undermount studs, sink clips, Chem-Set 633 Epoxy (suitable natural stone countertops,) dispensing gun, and mixing nozzles.
Benefits:
- The anchor kit is ideal for counters made from natural stone (granite, marble, concrete, wood.)
- No additional glues are needed. The stud base glues to the underside of the counter using epoxy.
- The 1-1/2″ diameter stud base is designed to fit into tight areas.
- Easily install sinks using the included wing nuts, lock washers and sink clips.
- The kit contains a dispensing gun and mixing nozzles good for several applications.
- Each Undermount Stud set includes four sets of hardware plus dishwasher mounting brackets/fasteners.
Each Kit will Contain:
- (4) M1-RB38-1/4-20×0.75″ Studs
- (4) Z-Shaped Sink Clips
- (4) Wingnuts
- (4) Washers
- (2) F1CT Dishwasher Fasteners
- (1) 633 Epoxy, 50ml Cartridge
- (1) 50ml Dispense Gun
- (2) Extra Mixing Tips
Instructions:
- Remove the cap from 633 Epoxy Adhesive. Dispense a small amount of adhesive until the adhesive is flowing from both chambers of the container.
- 50ml Cartridge: Place the cartridge into the dispensing gun without attaching the mixing nozzle. Dispense a small amount until both sides dispense at the same time. Attach a mixing nozzle and dispense a 6-8” bead of adhesive on scrap material to purge the cartridge.
- Clean the area to be bonded and the glue-on fastener with alcohol. The surface must be clean and dry for good adhesion.
- Carefully apply 633 Epoxy to the base of the glue-on fastener and set in desired position on the underside of the countertop around the sink cut-out.
- Allow 45 – 60 minutes for adhesive to reach proper handling strength.
- Note: Adhesive will continue to cure for up to 24 hours.
- Once the adhesive has reached handling strength, place the sink into position, mount the ‘Z’-shaped sink mounting bracket onto the glue-on fastener, add the washer, then tighten with the wingnut.
Product Attachments
Sink Anchor Kit Instructions (521.41 kB)
Our Price Starting at $87.67
Featured Products
-
Expert Support. -
Same-Day Shipping. -
50+ Years of Service
Counter Balance is a leading supplier of adhesives, chemicals and hardware for nearly every market in the industrial, government and defense sectors. Whatever your industry, we have all the hardware and adhesives you need to hold things together and keep things in place.